Give The formula you should use to calculate the geometric tolerance at any produced size when a MMC material condition symbol is applied to an external feature, such as a shaft.

What will be an ideal response?


External Feature: MMC – Produced Size + Given Geometric Tolerance =
Applied Geometric Tolerance.

Trades & Technology

You might also like to view...

? Identify and state the historical significance of John Brown.

What will be an ideal response?

Trades & Technology

The traffic on the design lane of a proposed four-lane rural interstate highway consists of 40% trucks. If classification studies have shown that the truck factor can be taken as 0.45, design a suitable flexible pavement using the 1993 AASHTO procedure if the AADT on the design lane during the first year of operation is 1000, The pavement structure will be exposed to moisture levels approaching saturation 20% of the time, and it will take about one week for drainage of water. Effective CBR of the subgrade material is 7. CBR of the base and subbase are 70 and 22, respectively, and Mr for the asphalt mixture, 450,000 lb/in2.

pi = 4.2, and pt = 2.5. Growth rate = 4% Design life = 20 years Reliability level = 95% Standard deviation = 0.45 What will be an ideal response?

Trades & Technology

What are the two types of fixed metering devices?

What will be an ideal response?

Trades & Technology

The concept that drives the need for Total Quality is competitiveness.