A four-leg intersection with no traffic control is formed by two 2-lane roads with the speed limits on the minor and major roads being 25 and 40 mi/hr, respectively. If the roads cross at 90° and a building is to be located at a distance of 50 ft from the centerline of the nearest lane on the minor road, determine the minimum distance at which the building should be located from the centerline of the outside lane of the major road so that adequate sight distances are provided. Grades are approximately level.

What will be an ideal response?


To ensure sufficient sight distances for each intersection approach, a line

of sight must be provided that allows for sufficient time for a driver to perceive

and react to a vehicle on the crossing approach. The required distance (offset of

building from roadway) can be found using Table 7.7 and Equation 7.4.



Given:

b = 50 ft

From Table 7.7:

da = 195 ft (major approach)

db = 115 ft (minor approach)

115 / 195 = a / (195 – 50)

a = 85.51 ft

The distance between the centerline of the outside lane on the major road

and the building should be 86 ft.

Trades & Technology

You might also like to view...

Hydronic heating systems are systems in which water or ____________________ carries the heat through pipes to the areas to be heated.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Answer the following statement(s) true (T) or false (F)

1. A functional model is the resulting description or structure of the system in terms of its functions. 2. The goals of a device are what the users want to have or realize by using the device. 3. Actions are the behaviors of the users when they use a device. 4. Behaviors are the state changes exhibited by the device. 5. Behavior is viewed as an observable characteristic of the function exhibited or manifested by the design structure.

Trades & Technology

In the case of a(n) ____________________ finish requirement, it is so specified by a note in the tail of the welding symbol.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

The vast majority of all the food and fiber crops produced in the United States are grown using ____________________ fertilizers and pest controls

Fill in the blank(s) with correct word

Trades & Technology