What is the advantage to variable frequency drive motors?
What will be an ideal response?
With conventional rack systems, parallel compressors are turned on and off by a control system and this cycling leads to a high current inrush each time a compressor starts. This starting and stopping will also lead to wear and tear on the compressors. In comparison, rack systems that use a VFD for motor speed control can adjust the compressor capacity throughout a wide range of demand that limits cycling, decreases power consumption, and increases the useful life of the compressor.
You might also like to view...
Which type lubricant is usually NOT used in a manual transmission/ transaxle?
A) High temperature chassis grease B) Engine oil C) SAE 80W-90 gear lube D) ATF
One of the common practices used in creating a stucco finish is to _____
a. fasten diamond mesh flat against the sheathing b. apply stucco in four coats c. apply stucco to a thickness of 3/4 inch d. use a stucco lock to prevent water penetration
Hint: 
= 400 ohmsZ = 1,100 ohmsFind R in ohms. Carry the answer to one decimal place.
Fill in the blank(s) with the appropriate word(s).
To address the service to be increased in the number of MSs in a CDMA system, it was decided to use TDMA as well. Is it possible to do so? If yes, how; and if no, why not?
What will be an ideal response?