Under certain loading conditions for the beam/cable configuration in Figure 13.7, static analysis determined Ax = 32 000 N, Ay = 8 400 N, and T = 46 000 N.
Find
(a) the mini-mum allowable pin diameter if the pin is stainless steel, in single shear, and has a design stress of 75 MPa, and
(b) the minimum cable diameter if the cable is structural steel with a factor of safety of 2.0 based on yield strength.
 FIGURE 1.png)
 ANSWER.png)
You might also like to view...
When scaffolding is higher than two sections, it should be tied to the structure at every _____ of height with a heavy-gauge wire.
A. 16' B. 21' C. 26' D. 32'
If two mutually exclusive alternatives have B/C ratios of 1.5 and 1.4 for the lower first-cost and higher first-cost alternatives, respectively: (choose one)
(a) The B/C ratio on the increment between them is greater than 1.4 (b) The B/C ratio on the increment between them is between 1.4 and 1.5 (c) The B/C ratio on the increment between them is less than 1.4 (d) The lower-cost alternative is the better one
Which term is used to describe pulses of air flowing from the engine out the air intake due to the time interval between intake events with a four-cylinder engine?
A) Pressure reaction B) Reverse airflow C) Intake redirection D) Speed density
Top-down hierarchical design considers every project detail first
Indicate whether the statement is true or false