Explain the parking brake switch test.
What will be an ideal response?
To check the parking brake switch and its wiring, locate the switch on the pedal, lever, or handle and disconnect it with the ignition off. If the switch connector has a single wire, connect a jumper from that wire to ground. If the switch connector has two wires, connect a jumper between the two wires in the connector. Turn the ignition on and check the brake warning lamp. If the lamp is lit, replace the parking brake switch. If the lamp is still off, find and repair the open circuit in the wiring harness between the body control computer and the switch.
You might also like to view...
____ has the ability to resist penetration from radiation.
A. Bronze B. Aluminum C. Lead D. Tin
In an open feedlot, rainfall does not significantly affect runoff
Indicate whether the statement is true or false.
Why do air-source heat pumps usually require auxiliary heat?
A) The heat that a heat pump "pumps in" must first be provided by an auxiliary heat source B) Because air-source heat pumps break down a lot C) The heat pump compressor will not start in cold weather unless it is first warmed up D) Because the heating capacity of the unit drops as house heating requirements increase
After learning about the different types of engineering programs, select a program that is offered at your school and read the catalog descriptions for courses offered in this major. Find two courses that best fit your personal interest in this major and describe why they interest you.
What will be an ideal response?