What would the HTM be for a building panel with a U value of 0.8 and a temperature difference of 40°F?
What will be an ideal response?
Multiply the U value time the temperature difference 0.8 x 40 = 32Bthu
You might also like to view...
Which of the following would be a good source of information for an external scan?
A) Employees B) Suppliers C) The company owner D) Customer contact personnel
Structural _______________ are usually rectangular in shape and defined by the dimensions within any four columns.
Fill in the blank(s) with the appropriate word(s).
Class III locations are hazardous because of the presence of ____, or where materials producing combustible flyings are handled, manufactured, or used, even though they are not likely to be airborne in quantities sufficient to produce ignitable mixtures.
A. volatile gases B. unstable vapors C. fine dust D. easily ignitable fibers
Two technicians are discussing what could be the cause of slow cranking and excessive current draw. Technician A says that an engine mechanical fault could be the cause. Technician B says that the starter motor could be binding or defective. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician