What level of tach reference information is required for the PCM to properly control a COP ignition system?
A. Level one information indicating that "a pair of cylinders`pistons is approaching TDC"
B. Level two information indicating "which pair of cylinders`pistons is approaching TDC"
C. Level three information indicating "which cylinder of the piston pair approaching TDC is on the compression stroke"
D. None of this information is required for the PCM to control a COP ignition system
Answer: C
You might also like to view...
Under the CSMA/CA protocol, suppose there are n users and the contention window for each user is W; then what is the collision probability?
What will be an ideal response?
When a jogging circuit is used, the machine operator has ____ control of the motor drive.
a. close to full b. little c. instantaneous d. no
When a zoned system uses a circulating pump for each individual zone, what other device is usually
needed? a. A boiler circulating pump b. A condensate pump c. Three-way valves d. A pressure-reducing valve
Which of the following statements is NOT true regarding the Toyota Hybrid inverter?
A. The inverter is used to provide AC voltage to MG1to start the gasoline engine B. The inverter is used to provide AC voltage to MG2 to accelerate the vehicle C. The inverter is used to convert AC voltage from MG2 to DC voltage to charge the high-voltage battery D. The inverter is used to provide DC voltage to MG1to start the gasoline engine