Open-root welds on stainless-steel plate generally have a bevel angle of _____
a. 15 degrees
b. 27-1/2 degrees
c. 30 degrees
d. 37-1/2 degrees
c
You might also like to view...
D, E, F, and G in Figure 4.13 are surveyed points in a land development on level terrain so that each point is visible from each other. Leg DG is physically measured as 500.0 m. The angles at three of the points are found to be: angle GDE = 55°, angle DEF = 92°, angle FGD = 134°. Also, angle DGE is measured at 87°. Compute the lengths of DE, EF, FG, and EG.
 FIGURE 1.png)
What is the shortest the channel can be cut, in inches?
Reduce all fractions to their simplest forms. Convert all improper fractions to mixed numbers. Provide answers in the following format:
Fraction: 3/4
Mixed number: 1 5/8
The type of schedule that shows dependent and critical path activities is the _____.
a. Gantt chart b. bar chart c. network schedule d. time and materials schedule
What are two types of plunger pumps are used in fuel subsystems?
A. Electrical a hydraulic. B. Single acting and double-acting. C. Single plunger and double plunger. D. Cam driven and solenoid.