Describe two-wired motor control circuits.
What will be an ideal response?
Two-wire motor control circuits are the most simple motor control circuits, but they also have limited control capabilities. Two-wire motor control circuits are called two-wire, because there are only two control circuit wires between the motor starter and the control device(s). Only two wires are needed, because two-wire control components, which are called pilot devices, are mechanical on-off type switches, similar to the toggle switch in a room to turn the lights on and off. Pilot devices control the motor starter control coil, but some other force must act on them to open and close the contacts (such as water level for a float switch); no operator is needed for the control circuit to operate. Pilot device is the term given to any two-wire control circuit component that mechanically closes and opens its control contacts, depending on the state of the medium it is measuring
You might also like to view...
Why were British forces slaughtered at Bunker Hill?
A. They were outnumbered. B. They chose to flank the colonists. C. The colonial forces attacked them at night. D. They used a full-frontal assault. E. They ran out of supplies and ammunition.
Which are advantages of fan arrays? Select all that apply.
A) They operate at lower speed. B) They are compact in length. C) They offer redundancy.
The thickness of a washer (in mm) is a random variable with probability density function
a. What is the probability that the thickness is less than 2.5 m?
b. What is the probability that the thickness is between 2.5 and 3.5 m?
c. Find the mean thickness.
d. Find the standard deviation a of the thicknesses.
e. Find the probability that the thickness is within ±a of the mean.
f. Find the cumulative distribution function of the thickness.
The almond tree resembles the
What will be an ideal response?