The following data are recorded at meteorological field stations. Determine the environmental lapse rate and stability classification of the atmosphere.

a. Temperature at ground level is 15.0°C. The temperature measured at 10 m is 15.1°C.
b. Temperature at ground level is 15.0°C. The temperature measured at 10 m is 14.7°C.
c. Temperature at ground level is 15.0°C. The temperature measured at 10 m is 15.5°C.
d. Temperature at ground level is 15.0°C. The temperature measured at 10 m is 14.1°C.

What will be an ideal response?




Trades & Technology

You might also like to view...

____________________ are beveled or angled edges that typically appear on the ends of shafts or fasteners. They are dimensioned by giving a length from the end of the part and an angle or by specifying two distances.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

What type of oil is specified for R-1234yf systems?

A) PAG with an added sealer fluid B) The same oil that R-134a uses C) A special mineral oil D) PAG with a special additive package

Trades & Technology

How can an installer accurately determine the weight for a particular rooftop unit?

A) an accurate estimate can be obtained by multiplying the unit volume times 2 pounds B) balance the unit on top of an electronic charging scale C) calculate the unit volume and divide that volume by the density of copper D) Look in the manufacturer's installation instructions

Trades & Technology

A good engine should produce how much compression during a running (dynamic) compression test?

A) 60-90 PSI B) 100-150 PSI C) 150-200 PSI D) 30-60 PSI

Trades & Technology