What are the two parts of verifying a runout tolerance applied to a cylindrical surface?
What will be an ideal response?
ANS:
Verifying a runout tolerance applied to cylindrical surface has two parts:
1. Establishing the datum axis RMB
2. Verifying the radial deviation of the surface elements are not greater than the specified runout tolerance
You might also like to view...
In Problem below, if the updated message is sent every 5 seconds, what is the upper limit on the number of messages initiated periodically if a table-driven routing protocol is to be used? Explain clearly.
A given ad hoc network consists of 100 nodes, and the mobility of the nodes is such that every one second, two existing radio connections are broken, while two new radio links are established. Assuming each node is connected to exactly four adjacent nodes, find the total number of communications links in the network.
When distortion must be kept to a minimum, which steel type should be used for hardening?
A) Water hardening B) Low carbon C) Oil hardening D) Air hardening
An 8-foot tall vertical stack of firewood casts a 12-foot shadow on horizontal ground. What is the angle of the sun in the horizon?
a. 8° b. 12° c. 45° d. 34°
Which system is designed to evaluate how efficient the heating of a pump is?
A) SEER B) HSPF C) EER D) Energy Star