Heat crayons will be used to:
a. mark an area to be heated on a component
b. let you know when a component reaches a specific temperature during a heatingprocess
c. help clean an area to be soldered
d. let you know when a component has been overheated during normal operation
B
You might also like to view...
A(n) ____ circuit interrupter is a device intended to provide protection from the effects of arc faults by recognizing characteristics unique to arcing and by functioning to de-energize the circuit when an arc fault is detected.
a. extended b. overload c. arc-fault d. closed
____________________ is a condition resulting from bacterial penetration into the frog and surrounding area.
Fill in the blank(s) with the appropriate word(s).
Which structural materials (i) undergo both thermal expansion and thermal contraction during service, and which materials (ii) undergo only moisture expansion (no moisture shrinkage) during service?
What will be an ideal response?
What type of thread does a 2? × 3/8? NF-24 bolt have?
A) National fine, 24 ft-lb of torque B) Normal capacity, 24 ft-lb of torque C) National fine, 24 threads per inch D) National coarse, 24 threads per inch