Describe the dimensions most often seen on elevations
What will be an ideal response?
Dimensions most often seen on elevations show the vertical relationship of the floor levels to each other. Other major changes in shape, such as cantilevers and overhangs, can also be shown. The relationship of the chimney to the roof or other portions of the structure within 10' (3000 mm) of the chimney are usually specified on the elevations.
You might also like to view...
When mixing mortar with the power mixer, _____ .
A. place the shovel inside the mouth of the mixer B. pull fallen or torn bags out of the mixer carefully whne the mixer is running C. use water and the turning of the blades to clean the mixer D. wear safety glasses or goggles
When preparing to start up a previously installed residential steam boiler, the boiler oil burner nozzle must be _____.
a. inspected b. adjusted c. cleaned d. replaced
Write a program to compute the Fourier coefficients (up to the 10th harmonic) of the square wave in Table 17.3 with A = 10 and T = 2.
 figure 3.png)
 FIGURE 4.png)
 ANSWER.png)
A building 52' long and 32' wide is to be constructed using 8" block. The concrete footings are to be 3' wide and 8" thick. What is the length of the footing in feet?
What will be an ideal response?