With the compressor off, a technician compares the pressure of an air cooled condenser with the pressure given on the PT chart for that refrigerant and temperature. The system pressure is considerably higher than the pressure indicated on the PT chart for that refrigerant and temperature. This indicates that:
A) The system has been undercharged.
B) The system has been properly evacuated and charged.
C) The system has been slightly overcharged.
D) The system has non-condensable gasses in it.
D
You might also like to view...
Companies traditionally offer craft-professional training _____.
a. that a supervisor leads in a classroom setting b. only in a classroom setting c. in a hands-on setting, where they learn from an experienced worker d. on a self-study basis
The accompanying figure shows the construction of a typical deck. What is feature 3?
A. Joists B. Planking C. Wood posts D. Built-up girder
In determining the load of the highest-rated motor, the greater of either the ampere rating from 430.22(E) or the largest continuous-duty motor full-load current multiplied by ____ shall be used in the summation.
A. 1 B. 1.25 C. 1.50 D. 1.75
Technician A says the MAP sensor is for the engine and has no affect on transmission shift control. Technician B says the MAF sensor provides information about engine load to the TCM (transmission control module) and is important for TCM shift control. Who is correct?
A. Technician A B. Technician B C. Both Technicians A and B D. Neither Technician A nor B