Gear ratio compares the number of ____________________ on different gears.
Fill in the blank(s) with the appropriate word(s).
teeth
You might also like to view...
Each cell is sectored in a slightly different way into three sectors as follows:
What will be the impact of such sectoring on channel borrowing and what will be
its effect on co-channel interference? Explain carefully.
Answer the following statement(s) true (T) or false (F)
1.A device box or lighting outlet box can also be used as a junction box. 2.Nonmetallic device boxes used in residential wiring typically have both their cubic-inch volume and the maximum number of 14, 12, and 10 AWG conductors marked on the box. 3.The NEC® requires electrical boxes to be mounted so that they are flush with the finished surface of walls made of both combustible and noncombustible materials. 4.The NEC® requires all device boxes installed to meet the requirements of Section 210.52 to be no higher than 5-1/2 feet but has no other rules regarding the mounting height of electrical boxes for switches or receptacles in residential wiring. 5.The NEC® requires that device boxes be installed so that all nails or screws are outside the box.
Which sensor is used to measure manifold vacuum?
A) TP B) RPM C) MAP D) ECT
An ohmmeter should be connected to the circuit or component being tested _____________
A) With current flowing in the circuit or through the component B) When connected to the battery of the vehicle to power the meter C) Only when no power is flowing (electrically open circuit) D) Both B and C