In a recirculating water system condenser, the leaving water temperature is normally ____________________°F lower than the condensing temperature of the refrigerant.

Fill in the blank(s) with the appropriate word(s).


ten

Trades & Technology

You might also like to view...

The difference between softwoods and hardwoods is based on the

A) strength of wood. B) botanical characteristics. C) abrasion resistance of wood. D) decay resistance of wood. E) density of wood.

Trades & Technology

List five components of hydraulic circuitry.

What will be an ideal response?

Trades & Technology

After troubleshooting a series RL circuit, you check the resistance of the inductor and it is around 40 ohms. What conclusion does this bring you to?

A) Since the inductor's voltage was nearly zero, the inductor is probably okay so the resistor must be shorted. B) Since the inductor's voltage was nearly zero, the inductor is probably okay, so the resistor must be open. C) Since the inductor's voltage was nearly zero, you are sure the windings have shorted. D) not enough information

Trades & Technology

Which of the following would NOT cause a high pressure switch open fault?

A. A break in the wiring harness B. An unseated connector C. Refrigerant overcharge D. Moisture intrusion into the connectors or switch

Trades & Technology