Al aislar conductos con material en lámina, ¿qué superficie(s) deben cubrirse con adhesivo?
a. El material en lámina
b. La superficie del conducto
c. Las uniones de tope
d. Tanto la superficie del conducto como el material en láminas
d. Tanto la superficie del conducto como el material en láminas
You might also like to view...
Air films have a significant resistance to heat flow. There are films on both the inside surface and the outside surface of a wall. Which has the higher resistance?
A) Outside film. B) Inside film. C) Neither; they're the same.
In most building projects, the consultants are hired by the architect to ensure complete coordination among the tasks of the architect and the consultants. However, in some projects, one or more consultants may be hired directly by the owner (sometimes before the selection of the architect). In such cases, the architect may still be held accountable for any error committed by the owner-appointed
consultant(s). Explain why that is so. What will be an ideal response?
Given the circuit in Fig. 11.80, find I? and the overall complex power supplied.
 FIGURE 1.png)
If a normally operating motor draws 75 amps on startup, it will most likely draw ____________________ amps when running.
Fill in the blank(s) with the appropriate word(s).