Which part of a residential lighting and small appliance load must be rated at 35% for service calculations?
a. The first 500VA
b. The first 1,00VA
c. The next 117,000VA
d. The next 125,000VA
c. The next 117,000VA
You might also like to view...
In the AWS specification for carbon steel-covered arc electrodes, a 1 to the right of the tensile strength indicates the following welding position(s): ____.
A. flat, horizontal, overhead, and vertical-down B. all positions flat, horizontal, vertical, and overhead C. flat only and is no longer used D. horizontal fillets and flat
All of these are functions of antifreeze EXCEPT ________
A) Corrosion inhibitor B) Water pump lubricant C) Rust inhibitor D) Ethanol enhancer
The location of a weld ____.
A. depends on the type of metal material that is being used B. is based on the type of welding process used C. is where the materials actually combine the grain structure from one piece to the other D. depends on the strength of the welded material E. none of the above
The wire sizes used in welded-wire fabric reinforcement are designated by _____.
a. AWG wire gauge b. cross-sectional area in hundredths of a square inch c. cross-sectional area in hundredths of a square centimeter d. diameter in thousandths of an inch