What is the maximum center-to-center spacing of brick veneer anchors?
What will be an ideal response?
One anchor to cover maximum 2.67 sq ft of wall area. Thus, if the anchors are provided every 16 in. on center vertically, their horizontal spacing should not exceed 24 in.
You might also like to view...
A Type A variable support unit is used where _____ head room is available.
a. limited b. extensive c. narrow d. existing
A(n) ____________________ switch eliminates the possibility of a generator voltage being applied to the secondary of the utility's supply transformer.
Fill in the blank(s) with the appropriate word(s).
A service technician removed the inspection/fill plug from the differential of a rear-wheel drive vehicle and gear lube started to flow out. Technician A says that the technician should quickly replace the plug to prevent any more loss of gear lube. Technician B says to catch the fluid and allow the fluid to continue to drain. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
An AC voltage leakage test is being performed. What is the maximum allowable AC voltage?
A. 200 mV B. 500 mV C. 800 mV D. .2 mV