Two technicians are discussing FWD driveshaft service. Technician A says that removal of the driveshaft usually requires partial disassembly of the front suspension. Technician B says that the first step in driveshaft removal is to loosen the front hub nut. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
C) Both technicians
You might also like to view...
The maximum distance permitted by the code between the inside face of the veneer and the outside face of the backup in a brick veneer wall assembly is 4-1/2 in. What is this provision based on?
What will be an ideal response?
?When using hydrochloric acid in an etch test, the welds are immersed in the reagent ____.
A. ?at room temperature B. ?at or near freezing C. ?at or near boiling temperature D. ?at 100 degrees Fahrenheit
Traffic flow on a three-lane (one direction) freeway can be described by the Greenshields model. One lane of the three lanes on a section of this freeway will have to be closed to undertake an emergency bridge repair that is expected to take 2 hours. It is estimated that the capacity at the work zone will be reduced by 30% of that of the section just upstream stream of the work zone. The mean free flow speed of the highway is 55 mph and the jam density is 135 veh/mi/ln. If it is estimated that the demand flow on the highway during the emergency repairs is 90% of the capacity, using the deterministic approach, determine: (i) The maximum queue length that will be formed (ii) The total delay (iii) The number of vehicles that will be affected by the incident (iv) The average individual delay
What will be an ideal response?
Draw the shear and moment curves for each member of the frame in Figure P5.25. Sketch the deflected shape hinges at B and C.
