Typical intake valve stem-to-guide clearance is ________
A) 0.015 to 0.020 inch (0.4 to 0.5 mm) B) 0.030 to 0.045 inch (0.8 to 0.10 mm)
C) 0.005 to 0.010 inch (0.13 to 0.25 mm) D) 0.001 to 0.004 inch (0.025 to 0.076 mm)
D
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. For the gentle starting of large motors, a motor starter is used. 2. Four-terminal manual starting has three functions in common with three-terminal starting rheostats. 3. Four-terminal manual starting has three functions in common with three-terminal starting rheostats. 4. Series and cumulative compound motors are rarely used on cranes, elevators, machine tools, and other devices where the motor is under the direct control of an operator. 5. A contactor is a switch that is closed or opened by the magnetic pull of an energized relay coil.
What type of lines show where a section is removed for examination?
A. hidden lines B. phantom lines C. cutting plane lines D. broken lines
What is the working pressure for a low pressure boiler?
What will be an ideal response?
What gauge wire is most often used for residential receptacle circuits?
A) 12 gauge B) 18 gauge C) 14 gauge D) 16 gauge