Answer the following statement(s) true (T) or false (F)
1. When used as a pulse timer, the 555 timer is connected differently than the 555 timer that is used as an oscillator.
2. In a 555 circuit used as a pulse timer, the capacitor is charged by the Vcc and not from a feed-back circuit from the output of the timer.
3. In the accompanying figure, transistor Q2 is used to turn relay coil K1 on or off.
4. In the accompanying figure, once capacitor C1 has been charged, it is prevented from discharging through resisters R3 and R4.
5. In the accompanying figure, pin #2 is connected to pin #6, which is at ground potential.
1. True
2. False
3. False
4. False
5. True
You might also like to view...
Inside the transmission the manual valve is held in position by ________.
A) The rooster comb B) A spring loaded solenoid C) The shift cable D) None of these
A mineral-insulated cable is a type of _____.
a. self-regulating cable b. parallel resistance heating cable c. power-limiting cable d. constant-wattage, series resistance heating cable
List three advantages of a warm air electric furnace as compared to an oil or gas furnace
What will be an ideal response?
In the accompanying figure, measurement a has a value of ____________________ inches.
Fill in the blank(s) with the appropriate word(s).