Answer the following statement(s) true (T) or false (F)
1. Conventional gas- and oil-fired boilers are currently used in the vast majority of residential and light commercial hydronic systems in North America.
2. The cast-iron sectional boiler is currently one of the most common boilers used in residential and light commercial buildings in North America.
3. If a cast-iron boiler is significantly oversized and experiences long off-times between firing cycles, much of the heat stored in the boiler’s thermal mass can be carried up the flue by air currents passing through the combustion chamber.
4. Many boilers currently used in North America were designed with the intent that flue gases would condense within the boiler.
5. Condensing boilers are designed with large heat exchanger surfaces capable of extracting more heat from the exhaust gases compared to the heat exchangers in conventional boilers.
1. True
2. True
3. True
4. False
5. True
You might also like to view...
Traditionally, seal shafts consisted of _____
a. rope or braided style packing in a stuffing box b. O-rings and gaskets around a shaft c. a spring-loaded shaft seal d. a stuffing box packed with grease
The diameter of a piston out of an I-6 diesel engine is 5.875 inches. Find the area of the piston face. Assume ? = 3.1416 and round to the nearest hundredth
What will be an ideal response?
Pressure varies the value of capacitance in a variable capacitor pressure sensor by changing __________.
A. the size of the capacitor plates B. the dielectric C. the distance between the plates
True or false? Estimates of U.S. natural gas reserves have dropped in the past 50 years as we have used up the supply
What will be an ideal response?