When referencing coaxial diameters as primary co-datums MMB, what six conditions apply?
What will be an ideal response?
ANS:
The six conditions that apply when referencing coaxial diameters as primary co-datums MMB are:
1. The datum is an axis (line).
2. The axis of the datum feature simulators is the datum axis.
3. The datum feature simulators are fixed at the MMB size.
4. The part is oriented by the datum feature simulator.
5. The datum reference frame consists of two planes passing through the datum axis.
6. Four degrees of freedom are constrained (two translational and two rotational).
You might also like to view...
The term MOST-Likely used to describe the speed of O2 sensor oscillations between rich and lean is:
A. trip B. drive cycle C. switch ratio D. heat soak
Vitamin B12 is only found naturally in ____________________ products
Fill in the blank(s) with correct word
Which of the following is not a dimension by which you can examine opportunities?
A. Products B. Approach C. Returns D. Customers
The subsequent problems deal with the improved integrator circuit shown below, where: R1 = R2 = Rs = R.
If Vin = 5V dc, what is the steady state voltage at Vout?
A. ?5 V B. ?2.5 V C. 5 V D. 2.5 V E. 0 V