Carbon steel pipe welds made with GTAW normally require a 15- to 20-degree _____
a. push angle
b. drag angle
c. work angle
d. bevel angle
a
Trades & Technology
You might also like to view...
Refer to the bridge amplifier shown in Fig. 5.109. Determine the voltage gain v?/vi .
 FIGURE 1.png)
Trades & Technology
On a dividing head with a 40:1 ratio, one turn of the index crank revolves the spindle ________ degrees
A) 9 B) 15 C) 27 D) 54
Trades & Technology
Which method enables ultraviolet (UV) lamps to be able to kill the maximum number of microbes in a duct
system? a. Install UV lamps in the airstream ahead of an EAC. b. Constantly bathe the evaporator coil with UV light. c. Cycle the UV lamps on and off with the furnace blower. d. Install UV lamps in the return air duct airstream.
Trades & Technology
If the coolant temperature gauge registers above the normal range, the driver should _____.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology