If contamination has entered a water distribution system or water main when it is opened during installation or for repairs, how would a technician correct this problem?
What will be an ideal response?
Flushing or chlorination will usually solve this type of problem, but most health agencies
require assurance through testing prior to occupancy.
You might also like to view...
Determine the height of gage blocks required to set an angle of 17o22' on a 5'' sine plate. Give your answer to the nearest thousandth inch.
A. 1.735 B. 1.888 C. 1.492 D. 1.012
The secretion _____________________ curdles the casein in milk
Fill in the blank(s) with correct word
The primary (low-voltage) ignition system must be working correctly before any spark occurs from an ignition coil. Which of these component is NOT in the primary ignition circuit?
A) Spark plug wiring B) Ignition switch C) Ignition module (igniter) D) Pickup coil (pulse generator)
There are eight pole-zero graphs of system transfer functions in Figure E.48. Answer the following questions about their frequency responses, impulse responses and step responses. Frequency response:
(a) Which have a phase approaching zero at very high frequencies?
(b) Which have a phase that is discontinuous at zero frequency?
(c) Which have a magnitude approaching zero at high frequencies?
Step response:
(a) Which have a step response that is nonzero in the limit t ? ??
(b) Which have a step response that is discontinuous at t = 0?
Impulse response:
(a) Which have an impulse response that contains an impulse?
(b) Which have an impulse response approaching zero in the limit t ? ??
