On an isometric drawing the three view are the _________ view, the _________ view and the ___________ view.
Fill in the blank(s) with the appropriate word(s).
plan, front, right side
Trades & Technology
You might also like to view...
What are the four types of part deviations a profile tolerance can affect?
What will be an ideal response?
Trades & Technology
For a straight pull, the minimum length for a pull box with two 1" conduits and one 4" conduit on one wall and two 1" conduits and one 4" conduit entering the opposite wall is _____. (The conductor size is No. 4 AWG or larger, but operating at less than 1,000V.)
a. 24" b. 26" c. 32" d. 34"
Trades & Technology
Name two standards that cover how welds are to be represented on engineering drawings.
What will be an ideal response?
Trades & Technology
The throttle plate is spring loaded to hold the throttle slightly open how far?
A) 8% to 10% B) 22% to 28% C) 3% to 5% D) 16% to 20%
Trades & Technology