Wires from a sensor to a ground fault relay should be no longer than _____.
a. 10'
b. 25'
c. 50'
d. 100'
b. 25'
You might also like to view...
If you have a system with twenty-five parts, you probably will not want to check for interference between all parts in the assembly; that would require ____ checks.
A. 24 B. 24*24 C. 24! D. 2424
When normal surfaces are parallel to the top view, they are referred to as ____ surfaces.
A. planar B. profile C. frontal D. horizontal
When a drop in evaporator pressure is sensed, an evaporator pressure regulating valve will respond by
_____. a. opening fully b. moving toward closed c. moving toward open d. closing completely
When operated with the same power source, which induction motor will have a higher RPM: a four-pole motor or a six-pole motor?
A) The four-pole when turning clockwise, the six-pole motor when turning counterclockwise. B) The four-pole motor will turn faster. C) The number of poles does not affect the speed of the motor. D) The six-pole motor will turn faster.