The total number of types of construction, including their sub-classifications, in a building code is
A) 6.
B) 7.
C) 8.
D) 9. E) 10.
D) 9. E) 10.
You might also like to view...
The term ____________________ is commonly used by manufacturers to indicate the surface area of the water remaining in the bowl once the flush is completed.
Fill in the blank(s) with the appropriate word(s).
Range is defined as:
a. the portion of the process controlled by the controller. b. the difference ? between the upper and lower range limits. c. is designed to reduce the difference between the set point and process variable by adjusting the controllers output continuously until the offset is eliminated d. enhances controller output by increasing the output in relationship to the changing process variable.
Land drainage is beneficial because ________
A) it increases the depth of root penetration in the soil B) it increases the availability of iron and manganese in acid soils C) it increases the alternate of expansion and contraction due to freezing and thawing of soils D) it slows down the rate of soil warming in the spring E) it increases the water-to-air ratio in the soil pores
The minimum clearance to allow for the front of the service access panel on equipment installed in an attic is:
A) A 30" × 30" level area. B) A 12" × 30" level area. C) A 36" × 36" level area. D) A 24 " × 24" level area.