Transfer switches are sized based on _____.

a. 80% of the generator capacity
b. 125% of the maximum critical load
c. 150% of the emergency load
d. the calculated continuous current


d. the calculated continuous current

Trades & Technology

You might also like to view...

When using a hacksaw blade to cut steel, which of the following statements is False?

A. Install the blade with the teeth pointing away from the handle. B. Use a blade with greater tpi (teeth per inch) to cut thicker steels. C. Apply slight pressure on the forward stroke. D. Use a 24 tpi blade to cut copper tubing

Trades & Technology

A contractor used 12,500 bricks for one job, 14,300 for a second job, and 11,750 for a third job. What is the average number of bricks used per job?

What will be an ideal response?

Trades & Technology

Why do air conditioning evaporators normally operate at 40°F?

What will be an ideal response?

Trades & Technology

A scale of 1:1 may also be referred to as _________________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology