In Spring 1915, which group was subject to a genocidal campaign of ethnic cleansing by the Ottoman army after rumors spread that they were assisting the Russians?

a. Azeris
b. Armenians
c. Circassians
d. Persians


b. Armenians

Trades & Technology

You might also like to view...

____________________ can occur when the sensor will not produce an output voltage at slower speeds.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Polymer Molding, Inc. is considering two processes for manufacturing storm drains. Plan A involves conventional injection molding that will require making a steel mold at a cost of $2 million. The cost for inspecting, maintaining, and cleaning the molds is expected to be $60,000 per year. Since the cost of materials for this plan is expected to be the same as for the other plan, this cost is not included in the comparison. The salvage value for plan A is expected to be 10% of the first cost. Plan B involves using an innovative process known as virtual engineered composites wherein a floating mold uses an operating system that constantly adjusts the water pressure around the mold and the chemicals entering the process. The first cost to tool the floating mold is only $795,000, but because

of the newness of the process, personnel and product-reject costs are expected to be higher than for a conventional process. The company expects the operating costs to be $85,000 for the first year and then decrease to $46,000 per year thereafter. There will be no salvage value with this plan. At an interest rate of 12% per year, which process should the company select on the basis of an annual worth analysis over a 3-year study period? What will be an ideal response?

Trades & Technology

A device that converts a nonelectrical impulse such as sound, heat, light, or pressure into an electrical signal is called a

A) A sending unit B) A switch C) An actuator D) Sensor

Trades & Technology

After stating the like quantities, it is necessary to reduce the ratio to ____________________ terms.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology