What are the steps involved in jump starting a vehicle?
What will be an ideal response?
Turn on the heater blower motor in the vehicle with the dead battery. Turning on the blower motor will allow it to help absorb any damaging voltage spikes when the key is turned to the "on" position to start the engine. Turn off all other switches and lights. Connect the hot cable first and the ground cable last. When attaching the ground cable from the booster battery to the dead battery, do not connect the other end of the negative cable to the dead battery. Connect it instead to a ground on the engine. A metal bracket or the end of the negative battery cable that is attached to the block will do.
As soon as the dead vehicle starts, disconnect the jumper cable immediately from the block. Remove the cables in the reverse order that they were installed.
You might also like to view...
Richard Nixon was selected as Dwight Eisenhower's vice-presidential running mate in 1952 as a concession to the
A. corporate interests. B. liberal Republicans. C. hard-line anti-communists. D. moderate Republicans. E. Southern Republicans.
The following statements are all correct EXCEPT _________
A) Employers are required to provide appropriate personal protective equipment for working with hazardous solvents. B) Unused solvents may be disposed of down the sewage drain. C) Employers are required to provide material safety data sheets listing information regarding the solvents used. D) Solvents may enter the bloodstream by ingestion, inhalation, or physical contact.
At what point should a brazed joint be washed with a wet rag?
a. As soon as the brazing is done b. Not until the joint cools to 250°F c. After it has cooled for at least 30 minutes d. As soon as it cools to 500°F
?What is used to simultaneously supply heat from storage and supplemental heat from an auxiliary heat source?
A. ?outdoor reset controller and diverter valve B. ?outdoor reset controller and differential temperature controller C. ?temperature sensing controller and diverter valve D. ?temperature sensing controller and differential temperature controller