When replacing contemporary injectors, what needs to be programmed into the PCM?
A. Injector calibration codes.
B. The injector service bit need to be reset to 0.
C. Which injectors were changed by cylinder number.
D. Nozzle opening pressure values.
Answer: A
You might also like to view...
The _____________________ system consists of an exciter stator assembly and an exciter rotor assembly.
Fill in the blank(s) with the appropriate word(s).
The filler metal alloys that are used in roughly 85 percent of aluminum welds are _____
a. ER4043 and ER4145 b. ER4043 and ER5356 c. ER4145 and ER5356 d. ER5183 and ER5554
The two main types of fan drives are:
A) Planetary gear drive and worm gear drive. B) Direct drive and belt drive. C) Magnetic drive and hydrodrive. D) Serpentine belt and chain drive.
Unlike gravel and sand, whose particles are roughly the same size in all three directions (i.e., equidimensional), clay particles are flat (plate-like or flakes). This particle shape makes clay an unstable soil that swells with the addition of water and shrinks when dry. Explain the cause of this phenomenon.
What will be an ideal response?