Chamfered edges are usually cut at angles ranging from:
A. Zero to 90 degrees
B. 20 to 60 degrees
C. 30 to 45 degrees
D. 40 to 50 degrees
Answer: C
Trades & Technology
You might also like to view...
When brazing, you should adjust the oxygen regulator to about _____ psi.
a. 10 b. 15 c. 40 d. 50
Trades & Technology
Many homes are built from ____ plans available from catalogs of house designs, building materials dealers, or magazines.
A. stock B. commercial C. industrial D. custom
Trades & Technology
What battery rating is tested at 32 deg F?
A) Cranking amperes (CA) B) Reserve capacity C) Battery voltage test D) Cold-cranking amperes (CCA)
Trades & Technology
If a resistance of 2.2 M? is connected across a 1 kV source, current equals about ________
A) 0.455 A B) 0.455 mA C) 45.5 ?A D) 2.2 mA
Trades & Technology