Peanuts grow _____

A) on top of the ground
B) in the soil
C) on bushes
D) on trees


B

Trades & Technology

You might also like to view...

OSHA standards provided specifically for the construction industry are covered in _____.

a. 29 CFR 1900 b. 29 CFR 1910 c. 29 CFR 1926 d. 29 CFR 1965

Trades & Technology

The skinned area requires more maintenance than the turfgrass on a softball field

Indicate whether the statement is true or false

Trades & Technology

The AS-I bus network ____ analog data.

A. supports B. does not support

Trades & Technology

Computer investigation of wind load on a building frame.

Case 1: The columns and girders of the rigid building frame in Figure P5.58 have been
designed initially for vertical load as specified by the building code. Floor beams are
connected to columns by rigid joints. As part of the design, the building frame must be
checked for lateral deflection under the 0.8 kip/ft wind load to ensure that lateral displacement
will not damage the exterior walls attached to the structural frame. If the code requires that
the maximum lateral deflection at the top of the roof not exceed 0.48 in. to prevent damage to
the exterior walls, is the building frame sufficiently stiff to satisfy this requirement?
Case 2: If the bases of the columns at point A and F are attached to the foundations by fixed
supports instead of pin supports, how much is the lateral deflection at joint D reduced?
Case 3: If a pin-connected diagonal bar bracing with a 2 in. × 2 in. square cross section
running from support A to joint E is added, determine the lateral deflection at joint D. Assume
pin supports at joints A and F.
For the columns, I = 640 in. 4 and A = 17.9 in.2; for the girders, I = 800 in. 4 and A = 11.8 in. 2 ;
for the diagonal brace, A = 4 in. 2 . Use E = 29,000 ksi.

Trades & Technology