Two important points concerning emitter-coupled logic are:
A) the output voltage levels are not the same as the input logic levels and the two outputs are in phase with each other.
B) the output voltage levels are the same as the input logic levels and the two outputs are in phase with each other.
C) the two output voltage levels are the same as the input logic levels and the two outputs are complements of each other.
D) the output voltage levels are not the same as the input logic levels and the two outputs are complements of each other.
D
You might also like to view...
Technician Asays a normally open switch is used in most coolant temperature warning light circuits. Technician B says most oil pressure warning circuits use a normally closed switch. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
Switch problems can be grouped into two categories, problems with the operator and problems with the contacts
Indicate whether the statement is true or false
Smaller aggregate is incorporated in the concrete mixture, then exposed after tilt-up by using ____
a. compressed air b. vibratory grinding c. rotary wire brushing d. pressure washing
A"Hot-Cold-Hot" test ensures a multi-meter is functioning properly and the circuit is at zero potential.
Answer the following statement true (T) or false (F)