When selecting a point to tie off your body harness, you should always choose an anchorage point that is
_____.
A) at least 20? above where you will be working
B) directly below your working position
C) capable of supporting at least 5,000 pounds for each worker attached to it
D) low enough to allow you to drop to the ground from the end of your lanyard
Answer: C
You might also like to view...
Laying brick so that they touch the line is known as _____ .
A. laying brick correctly B. edging the line C. correcting the course D. crowding the line
When an "A" coil is used in a horizontal application, the coil is laid on its side and a special ____________________ is required.
Fill in the blank(s) with the appropriate word(s).
Microcontroller peripherals typically require control registers to specify how the peripheral will function
Indicate whether the statement is true or false
The amount borrowed is called the ____________________.
Fill in the blank(s) with the appropriate word(s).