Dampeners are used on some fuel rails to ________
A) Increase the fuel pressure in the rail
B) Trap dirt and keep it away from the injectors
C) Reduce (decrease) the fuel pressure in the rail
D) Reduce noise
Ans: D) Reduce noise
You might also like to view...
The amount of light, or ____, needed for exterior areas is dependent upon the type of activity that is to take place in a specific area.
A. luminaire B. distribution C. efficacy D. illuminance
Principal ? rate ? time = ____________________
Fill in the blank(s) with the appropriate word(s).
Assuming the compounds form ideal solutions, what is the flow rate of C in the exiting stream?
A feed stream of 50 mol/minof A and 50 mol/min of B at 500 K enter an adiabatic steady state reactor. The reaction is A + B ? C and occurs in the liquid phase. The stream leaving the reactor is at equilibrium. CP = 80 J/mol•K for compound C, and ?CP for the reaction is 0. At 298.15 K,?HR0 = -13 kJ/mol and ?GR0 = -20 kJ/mol. A. 0.0009 mol/min B. 32.63 mol/min C. 46.35 mol/min D. 47.45 mol/min E. 53.65 mol/min
As more load gates are connected to a driving gate, the loading on the driving gate ________
A) decreases B) increases C) serves as a current source D) serves as a current sink