The brake bleeding procedure usually specified for a rear-wheel drive vehicle with a dual split master cylinder is ________

A) LR, RR, LF, RF B) RF, LR, LF, RR C) RR, LR, RF, LF D) LF, RF, LR, RR


C

Trades & Technology

You might also like to view...

Minerals come from living sources

Indicate whether the statement is true or false

Trades & Technology

Which statement is true regarding cooling systems?

A) Thermostats are rated according to the temperature they are fully open. B) Heat transfer explains how radiators work. C) Radiators are most effective when the coolant is closer to the temperature of the outside air. D) Removing the thermostat is a good way to solve cooling system problems.

Trades & Technology

Give three specific crop production factors that can be manipulated by the producer for a successful operation

What will be an ideal response?

Trades & Technology

Three different materials are shown in the section view of an object. The upper portion is made of a bronze material and is a horizontal rectangular piece. Under the bronze material, the remaining space is evenly divided vertically with a steel material on the left and a cast iron material on the right. Which of the following is (are) true?

A. If the bronze section lines are drawn at a 45° angle, then the steel and cast iron section lines could be drawn at a 135° angle. B. If the bronze section lines are drawn at a 45° angle, then the steel section lines could be drawn at a 135° angle, and the cast iron section lines could be drawn at a 90° angle. C. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 180° angle. D. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 60° angle. E. none of the above

Trades & Technology