Micro switches are used in small spaces that would never be accessible to a larger device.
Answer the following statement true (T) or false (F)
True
You might also like to view...
The type of gear set used in most automatic transmissions is ________.
A) Helical gears B) Planetary gears C) Spur gears D) Any of the above
Answer the following statement(s) true (T) or false (F)
1.In all areas specified in Section 210.52, all nonlocking type 125- and 250-volt, 15- and 20-ampere receptacles must be tamper-resistant. (General Rule) 2.Section 210.12(A) in the NEC® requires all of the 15- and 20-ampere, 120-volt branch circuits installed in dwelling unit kitchens, family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sun rooms, recreation rooms, closets, hallways, laundry areas, or similar rooms or areas to be AFCI protected. 3.All metal device boxes need to have the circuit equipment-grounding conductor(s) connected to it with a 10-32 green grounding screw. 4.Section 404.10(B) specifies that screws used for attaching a switch to an electrical box must be sheet metal screws with a thread that matches the thread gage or size of the screw holes in the box.
The ____ topology resembles the hub of a wheel with spokes extending outward.
A. ring B. star C. mesh
Most of the heat energy in the suction vapor entering the compressor is ____.
A. heat of compression B. sensible heat C. latent heat D. defrost heat