What does the galvanizing term "G60" mean?
What will be an ideal response?
G60 means that the member has been hot-dip galvanized and the amount of zinc coating on all surfaces of the steel member is 0.60 oz per sq ft. Thus, on a steel plate, G60 means 0.30 oz of zinc on each surface of the plate.
You might also like to view...
Indoor air quality starts with the creation of a Construction Air Quality Plan (CAQP).
Answer the following statement true (T) or false (F)
___________________ are used when hydraulic lines must be frequently connected and disconnected.
Fill in the blank(s) with the appropriate word(s).
A technician notices during a road test for a pulling complaint that the steering wheel is slow to return to center and requires higher than normal steering effort. The most likely cause of this condition could be:
A. A worn lower ball joint B. Tire pressure is set too high C. A loose outer tie rod joint D. An over-adjusted steering rack preload
____________________ starters are generally employed to start squirrel cage type motors.
Fill in the blank(s) with the appropriate word(s).