What procedure would you use to inspect seat belt anchors?
What will be an ideal response?
To inspect seat belt anchors, remove any plastic trim pieces over the metal anchor plates. Check the seat belt anchors and bolts for signs of movement or deformation. Replace if necessary. Position the replacement anchor plate in the original position. The belt and plate should face the seat or belt routing location.
You might also like to view...
What is TRUE about the Vehicle Identification Number (VIN)?
A. The 10 th digit is the year and the 8 th digit is the engine code B. The 8 th digit is the year and the 10 th digit is the engine code C. The VIN has 16 digits D. The VIN number can be the same for more than one vehicle
?When there is a spiral gear on the camshaft of a pushrod engine, what is its purpose?
A. ?It drives the distributor. B. ?It drives the oil pump. C. ?Both of the above D. ?Neither of the above
Skin effect refers to the fact that
A) current migrates to the outer surface of a conductor at higher frequencies B) current migrates away from the outer surface of a conductor at higher frequencies C) noise can enter a circuit through the surface of a circuit trace D) at higher frequencies transmission lines become effective capacitors
?Technician Asays when testing a circuit or component the voltmeter is connected in parallel with the circuit. Technician B says that for test purposes a voltmeter has internal low impedance or input resistance, to allow the meter to draw more current when connected to a circuit. Who is correct?
A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B