The proper grease to use with CV joints is ________
A) Red moly grease B) Dark blue EP grease
C) The grease that is supplied with the boot kit D) Black chassis grease
C
You might also like to view...
In the accompanying figure, a(n) ____________________ switch is connected to the output of the pressure switch.
Fill in the blank(s) with the appropriate word(s).
A ____ type of motor shaft is found on very small shaded pole C-frame motors. This type of shaft design is limited to only very low torque requirement applications, because only the friction of the setscrew of the coupling device with the mechanical load is preventing the shaft from slipping.
a. flat b. key c. round d. threaded
The duties of each team member vary according to each person's experience and abilities and the job size. In a large job, which team members are responsible for the bulk of the drawing?
A. CAD technicians and checkers B. Senior CAD technicians and checkers C. CAD technicians and drafting clerks D. CAD technicians and senior CAD technicians
A micrometer can be used to measure to an accuracy of ________
A) 0.001 in B) 0.01 in C) 0.0001 in D) None of these