What are the reactions at A and C in Figure 12.44? Assume the triangular plate has zero mass.
 FIGURE 1.png)
 ANSWER.png)
You might also like to view...
One type of injection system does that does not hold pressure when turned off is called a non-checking system. This is found on ________
A) Multiport injection systems B) All TBI systems C) Some General Motors TBI systems D) None of these
What should the technician do when replacing stabilizer bar links?
A) The stabilizer bar should be removed from the vehicle before replacing the links. B) The links can be replaced individually, yet the manufacturer often recommends that the links at both ends be replaced together. C) The stabilizer bar must be compressed using a special tool before removing or installing stabilizer bar links. D) Both B and C are correct.
Any exposed live parts must be guarded if they are operating at _____
a. 15V or more between terminals b. 50V or more between terminals c. 240V or more between terminals d. 600V or more between terminals
If inspection reveals a loose fastener, you should _____
a. report it to your supervisor b. remove it and install a new one c. install extra fasteners above and below the loose one d. tap it with a hammer to tighten it