A dimension is a numerical value or values, or mathematical expression provided in appropriate units of measure and used to define form, size, orientation or location of a feature or part, and can contain standard symbols that are unique to the specific dimensioned feature or dimensioning application.

Answer the following statement true (T) or false (F)


True

Trades & Technology

You might also like to view...

Using sketches and notes, explain how the joists and joist girders are stabilized against overturning.

What will be an ideal response?

Trades & Technology

Follow the steps of the Systematic Approach of Section 14.4—that is, (1) identify the system, (2) determine whether the process is batch or rate, (3) construct a schematic diagram with inputs and outputs, (4) Label known material quantities or rates of flow and so on. A solution of potassium chromate (K2CrO4) is to be used to produce K2CrO4 crystals using an evaporator and crystallizer/filter. A 38 percent solution is fed to the evaporator. The stream leaving the evaporator is 48 percent K2CrO4 and is fed to the crystallizer/ filter. Pure K2CrO4 crystals are produced and the remaining solution is 44 percent K2CrO4. This solution is cycled back to the evaporator. If 1.2 t/h of pure crystals are needed, calculate the total input to the evaporator, the feed rate to the

crystallizer/filter, and the water removed from the evaporator. What will be an ideal response?

Trades & Technology

Up until the age of four, the front teeth of the lower jaw are good indicators of

____________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

List three examples of lifting tools used in the shop.

What will be an ideal response?

Trades & Technology