Which organization is represented by the acronym AHRI?

What will be an ideal response?


Air-Conditioning, Heating & Refrigeration Institute.

Trades & Technology

You might also like to view...

To test the actuator, squeeze the plastic retainers and lift the motor from the top of the strut.

Answer the following statement true (T) or false (F)

Trades & Technology

(a) Determine the wind pressure distribution on the four sides of the 10-story hospital shown in Figure P2.15. The building is located near the Georgia coast where the wind velocity contour map in the ASCE Standard specifies a design wind speed of 140 mph. The building, located on level flat ground, is classified as stiff because its natural period is less than 1 s. On the windward side, evaluate the magnitude of the wind pressure every 35 ft in the vertical direction. (b) Assuming the wind pressure on the windward side varies linearly between the35-ft intervals, determine the total wind force on the building in the direction of the wind. Include the negative pressure on the leeward side.

Trades & Technology

Food and drink should not be present in blueprinting areas.

Answer the following statement true (T) or false (F)

Trades & Technology

Which part should be warm or hot in a normally functioning air-conditioning system?

A) The condenser B) The receiver-drier C) The outlet of the compressor D) All of the above

Trades & Technology