Discuss how you would create the solid model of the given objects.
What will be an ideal response?
1) Create the areas that make up the profile. Add them together.
2) Extrude in the –Z-direction by 6.0 in.
3) Move the work plane in the +Y-direction by 1.5 in. This is provided that you had the origin of the work plane at lower left corner of the bracket.
4) Rotate the work plane in the –X-direction by 90º.
5) On the active workplane create two solid cylinders of length 0.125 at location where the holes are.
6) Subtract the two cylinder volumes from the bracket volume to create the holes.
You might also like to view...
Government agencies that provide regulatory requirements applicable to the construction industry include OSHA, EPA, and _____.
a. BLS b. FCC c. DOT d. FAA
What is the fire rating of a wood (or steel) stud wall with three 5/8-in.-thick Type X gypsum boards on both sides?
What will be an ideal response?
In the 19th century, the business of horticulture was supported not only by the wealthy, but also by the
____, created by the Industrial Revolution and consisting of people with disposable income and the ability to buy floriculture products.
a. middle class economy c. merchant classes b. royalty in Europe d. patrons of the arts
Another name for a VOM is a(n) _____
a. ammeter b. multimeter c. voltmeter d. current meter