In general, digital clock hours and minutes can be adjusted by:
A) using a second, high speed clock pulse and enabling it only during time set mode.
B) using thumbwheel style BCD preloading.
C) routing the seconds counter to the hours and minutes clock as needed.
D) designing a clock set circuit to preload counter.
C
You might also like to view...
The ideal height for the forks when the forklift is traveling is _____.
a. 5 to 6 inches b. 6 to 8 inches c. 8 to 12 inches d. 12 to 18 inches
All of the following statements are true EXCEPT:
A. a pressure regulator can become defective due to foreign material or a ruined diaphragm. B. high pressure is usually caused by a bad pressure regulator or on looped systems when a pressure return line to the fuel tank is kinked. C. if gasoline drips from the vacuum hose when it is removed from a fuel pressure regulator, it is defective. D. fuel pressure regulators usually fail by causing pressure that is too high rather than too low.
What units are used to measure air volume?
What will be an ideal response?
The second step in using a Karnaugh map is to ____.
A. draw the diagram based on the number of variables B. plot the logic functions by placing a "1" in each square representing a term C. obtain the simplified logic function by looping adjacent groups of 1s in groups of eight, four, or two D. "OR" the loops with one term per loop