Results obtained from laboratory tests on a sample of RC-250 asphalt cement are given. Determine whether the properties of this material meet the Asphalt Institute specifications for this type of material; if not, note the differences.
What will be an ideal response?
While the sample does meet some of the specifications, overall, it does not meet
specifications.
You might also like to view...
A benefit of CEMF is that it causes speed regulation.
Answer the following statement true (T) or false (F)
When assessing chassis electrical system performance, where should you always begin?
A. batteries B. alternator C. cranking motor D. power distribution module
What do the rungs of a ladder diagram represent?
A) Individual electrical circuits B) Individual controls C) Individual loads D) Actual system wires
Sally is making a sine bar, which is used to machine angles on parts (see Figure 4.19). She has a 1.250 in. thick bar that needs 90° grooves machined into it for precision ground 1.0000 in. diameter cylinders. A sine bar is used by placing different thicknesses under one of the cylinders so that the proper angle is attained. Sally wants the distance between the centers of the cylinders to be 5.000 in.
(a) How deep should she mill the 90° grooves so that the top of the sine block is 2 in. tall?
(b) Once her sine block is finished, she wants to mill a 22.5° angle on a brass block. What thickness of gage blocks will produce this angle for this sine plate?