What is the length of pipe needed if two 2" PVC DWV pipes must be connected at a 45° offset 36 inches apart? The fitting allowance is 1.5".
What will be an ideal response?
47.91"
You might also like to view...
Given the figure in P10.19 as the connectivity graph of a network, you are allowed to go through only two steps of the Bellman-Ford algorithm at each node so that their complexity (and hence the time required) can be kept to a low value. What is the impact on shortest path calculations? Comment on the accuracy of the procedure?
Determine the truck factor for this section of highway. Assume SN = 4 and pt = 2.5.
An axle weight study on a section of highway gave the following data on axle load distribution:
What will be an ideal response?
The two basic types of direct TPMS sensors include ________
A) Stem mounted and banded B) Beru and Schrader C) Indirect and direct D) Rubber stem and aluminum stem
Why does the compression refrigeration cycle have a high-pressure side?
A) So the refrigerant can evaporate at a high pressure and temperature B) To allow the refrigerant to boil C) To save on the amount of refrigerant required at lower pressures D) So the refrigerant can condense at a high pressure and temperature